• (1) Triton Cat R/C Model Boat
• (1) Futaba 2 Channel "pistol style" Radio Controller w/servos

Boat only

Boat & Radio gear
INSTALLED

• (1) Triton Cat R/C Model Boat
• (2) 1500mAh Sport NiCad Battery Packs 7.2V, 6 cells
• (1) MRC "819" Peak Detect AC/DC Battery Charger
• (1) Futaba 2 Channel "pistol style" Radio Controller w/servos
• (no) AA batteries, for the controller and receiver
      

Purchase this complete package and

 Save over $23.00!

Purchase this complete package and

 Save over $23.00!

• (1) Triton Cat R/C Model Boat
• (2) 1500mAh Sport NiCad Battery Packs 7.2V, 6 cells
• (1) UPGRADE MRC "959" Peak Detect AC/DC Battery Charger
• (1) Futaba 2 Channel "pistol style" Radio Controller w/servos
• (12) UPGRADE AA batteries, for the controller and receiver
     

 Purchase this complete package and

Save over $25.00!

Purchase this complete package and

 Save over $25.00!

• (1) Triton Cat R/C Model Boat
• (2) UPGRADE  3000mAh Sport NiCad Battery Packs 7.2V, 6 cells
• (1) MRC "959" Peak Detect AC/DC Battery Charger
• (1) Futaba 2 Channel "pistol style" Radio Controller w/servos
• (12) AA batteries, for the controller and receiver

Purchase this complete package and

Save over $31.00!

Purchase this complete package and

 Save over $31.00!

• (1) Triton Cat R/C Model Boat
• (2) UPGRADE 3300mAh Sport NiCad Battery Packs 7.2V, 6 cells
• (1) UPGRADE  MRC "969" Peak Detect AC/DC Dual Battery Charger
• (1) Futaba 2 Channel "pistol style" Radio Controller w/servos
• (12) AA batteries, for the controller and receiver

$299.99 

Purchase this complete package and

Save over $36.00!

$339.99

Purchase this complete package and

 Save over $40.00!

We now offer a water cooling kit for the Triton Cat twin motors! It is a simple kit to install and can be done in 15 minutes. Keeping the motors cool will extend the life of the motors and your run times.

Now available for only $25.00

2) Plastic Prop - Stock replacement, 4mm slip bore plastic prop, part # 98TRS06 $ 4.00
3) Metal Prop - UPGRADE your Triton Cat to a metal prop! It is easy only requires the prop and a shim (listed below) to convert this boat. We recommend the X640 Metal Prop, same "pitch" as stock prop but no flex. You can also run the X448 metal prop too. Be sure to buy the shim to adapt the 4mm shaft to fit the new 3/16" metal prop.

X640 Metal Prop, (40mm x 1.6 = 2.512"): $17.50 each Excellent Upgrade for the Triton Cat!

X448 Metal Prop (48mm x 1.4 = 2.660"): $18.00 each

4) Shim to fit a 3/16" prop on a 4mm smooth shaft (still use the stock prop nut): Only $1.00
 

5) Auto Bailer - The Auto Bailer is designed to remove unwanted water from the inside of your boats hull as you are running. This a great upgrade for any R/C model boat and we highly recommend this item. Mounted by drilling (or Dremel) a small hole (3/8" dia.) at the rear of the boat, the Auto Bailer can remove 1 Quart (16oz) of water from your boats hull in 1 minute, all while you are running the boat!
 Only $10.99 Product Review

 Want to see some pictures from the kit we installed?

6) Joint Cup - Stock replacement, part # 98TRS16 $ 3.99
7) Gear Adaptor - Stock replacement, part # 98TRS10 $ 4.99

8) Universal Joint - Factory UPGRADE, replaces the stock Joint Cup (#98TRS16), part # 98TRT1 $ 9.99

9) Ball Bearing (840) - Factory UPGRADE, replaces bronze bushings, part # 98TRT3 $11.99/pair

10) Ball Bearing, Flanged (840) - Factory UPGRADE, replaces bronze bushings, part # 98TRT4 $17.50/pair  

11) Thrust Bearing - Factory UPGRADE, this is a more efficient bearing model, part # 98TRT5 $ 3.99 (1 set as pictured)